################################################################################################### # Cypher BNet Server Configuration File # ################################################################################################### ################################################################################################### # BNet SERVER SETTINGS # # BattlenetPort # Description: TCP port to reach the auth server for battle.net connections. # Default: 1119 BattlenetPort = 1119 # # LoginREST.Port # Description: TCP port to reach the REST login method. # Default: 8081 # # LoginREST.ExternalAddress # Description: IP address sent to clients connecting from outside the network where bnetserver runs # # LoginREST.LocalAddress # Description: IP address sent to clients connecting from inside the network where bnetserver runs # # LoginREST.TicketDuration # Description: Determines how long the login ticket is valid (in seconds) # When using client -launcherlogin feature it is recommended to set it to a high value (like a week) # LoginREST.Port = 8081 LoginREST.ExternalAddress=127.0.0.1 LoginREST.LocalAddress=127.0.0.1 LoginREST.TicketDuration=3600 # # BindIP # Description: Bind auth server to IP/hostname # Default: "0.0.0.0" - (Bind to all IPs on the system) BindIP = "0.0.0.0" # # RealmsStateUpdateDelay # Description: Time (in seconds) between realm list updates. # Default: 10 # 0 - (Disabled) RealmsStateUpdateDelay = 10 # # WrongPass.MaxCount # Description: Number of login attempts with wrong password before the account or IP will be # banned. # Default: 0 - (Disabled) # 1+ - (Enabled) WrongPass.MaxCount = 0 # # WrongPass.BanTime # Description: Time (in seconds) for banning account or IP for invalid login attempts. # Default: 600 - (10 minutes) # 0 - (Permanent ban) WrongPass.BanTime = 600 # # WrongPass.BanType # Description: Ban type for invalid login attempts. # Default: 0 - (Ban IP) # 1 - (Ban Account) WrongPass.BanType = 0 # # WrongPass.Logging # Description: Additionally log attempted wrong password logging # Default: 0 - (Disabled) # 1 - (Enabled) WrongPass.Logging = 0 # # BanExpiryCheckInterval # Description: Time (in seconds) between checks for expired bans # Default: 60 BanExpiryCheckInterval = 60 # # AllowLoggingIPAddressesInDatabase # Description: Specifies if IP addresses can be logged to the database # Default: 1 - (Enabled) # 0 - (Disabled) # AllowLoggingIPAddressesInDatabase = 1 # ################################################################################################### ################################################################################################### # MYSQL SETTINGS # # LoginDatabaseInfo # Description: Database connection settings for the realm server. # Example: "hostname;port;username;password;database" LoginDatabaseInfo.Host = "127.0.0.1" LoginDatabaseInfo.Port = "3306" LoginDatabaseInfo.Username = "username" LoginDatabaseInfo.Password = "password" LoginDatabaseInfo.Database = "auth" # # DBQueryWorkerInterval # Description: Time (milliseconds) for Query Task Worker interval. # Default: 1000 DBQueryWorkerInterval = 1000 # ################################################################################################### ################################################################################################### # UPDATE SETTINGS # # Updates.EnableDatabases # Description: A mask that describes which databases shall be updated. # # Following flags are available # DATABASE_LOGIN = 1, // Auth database # # Default: 0 - (All Disabled) # 1 - (All Enabled) Updates.EnableDatabases = 0 # # Updates.SourcePath # Description: The path to your CypherCore source directory. # If the path is left empty, built-in CMAKE_SOURCE_DIR is used. # Example: "../CypherCore" # Default: "" Updates.SourcePath = "" # # Updates.AutoSetup # Description: Auto populate empty databases. # Default: 1 - (Enabled) # 0 - (Disabled) Updates.AutoSetup = 1 # # Updates.Redundancy # Description: Perform data redundancy checks through hashing # to detect changes on sql updates and reapply it. # Default: 1 - (Enabled) # 0 - (Disabled) Updates.Redundancy = 1 # # Updates.ArchivedRedundancy # Description: Check hashes of archived updates (slows down startup). # Default: 0 - (Disabled) # 1 - (Enabled) Updates.ArchivedRedundancy = 0 # # Updates.AllowRehash # Description: Inserts the current file hash in the database if it is left empty. # Useful if you want to mark a file as applied but you don't know its hash. # Default: 1 - (Enabled) # 0 - (Disabled) Updates.AllowRehash = 1 # # Updates.CleanDeadRefMaxCount # Description: Cleans dead/ orphaned references that occur if an update was removed or renamed and edited in one step. # It only starts the clean up if the count of the missing updates is below or equal the Updates.CleanDeadRefMaxCount value. # This way prevents erasing of the update history due to wrong source directory state (maybe wrong branch or bad revision). # Disable this if you want to know if the database is in a possible "dirty state". # Default: 3 - (Enabled) # 0 - (Disabled) # -1 - (Enabled - unlimited) Updates.CleanDeadRefMaxCount = 3 # ################################################################################################### ################################################################################################### # # LOGGING SYSTEM SETTINGS # # LogsDir # Description: Logs directory setting. # Important: LogsDir needs to be quoted, as the string might contain space characters. # Logs directory must exists, or log file creation will be disabled. # Default: "Logs" - (Log files will be stored in the current path) LogsDir = "Logs" # # Appender config values: Given an appender "name" # Appender.name # Description: Defines 'where to log' # Format: Type,LogLevel,Flags,optional1,optional2,optional3 # # Type # 0 - (None) # 1 - (Console) # 2 - (File) # 3 - (DB) # # LogLevel # 0 - (Disabled) # 1 - (Trace) # 2 - (Debug) # 3 - (Info) # 4 - (Warn) # 5 - (Error) # 6 - (Fatal) # # Flags: # 0 - None # 1 - Prefix Timestamp to the text # 2 - Prefix Log Level to the text # 4 - Prefix Log Filter type to the text # # File: Name of the file (read as optional1 if Type = File) # Allows to use one "{0}" to create dynamic files # Appender.Console=1,2,0 Appender.Bnet=2,2,0,Bnet.log # Logger config values: Given a logger "name" # Logger.name # Description: Defines 'What to log' # Format: LogLevel,AppenderList # # LogLevel # 0 - (Disabled) # 1 - (Trace) # 2 - (Debug) # 3 - (Info) # 4 - (Warn) # 5 - (Error) # 6 - (Fatal) # # AppenderList: List of appenders linked to logger # (Using spaces as separator). # Logger.Server=3,Console Bnet Logger.Realmlist=3,Console Bnet Logger.Session=3,Console Bnet Logger.Network=3,Console Bnet Logger.SqlUpdates=3,Console Bnet Logger.ServiceProtobuf=2,Console Bnet # ###################################################################################################